FEATURE Of Mounts

.IT isolators the vibration ang shock of the machine from thefloor.IT canalso reduce the influences from other machine.Bettr parts finshes and high quality from vibration reduction.IT eliminates the noise transferrde from thefloor or due to the resonance of building.Machine are stationary onthe floor withort anchors.IT keeps the machine in its position,Therefore the installation cost and time can be greatly saved.The layout can be easily changed to improve the prodrctivity.Machines can set up on the second floor.The machine tools level can be largerange adjusted.easily and fast.Elastomers is make of Nitvile rubber compoundLIt can resist oil and refrigerant.

Application

Metalcutting machines,Metalforming machines,Rubber and Printing machines,Wire machines,Packing machines,Foodprocess machines,Generatou andheavy-duty machines.

How To Install

Place the mounts under the anchor hole of the machine.Insertthe bolt intol the screw hole of mount.Andscrew it in until it reaches the bearing plate.Then adjust then adjrst the level of machine.Finally tighten the nuts.

产品特点：

减振像胶有效衰减机器知身的振动，减少振动力外传，阻止振动力传入，保证加工尺寸精度及质量。控制建筑物结构谐振传播振动力和噪音。使粗、精加工各类机订组成生产单元，适应物流技术的发展。安装 机床不需要设置地脚螺栓与地面固定，良好的减振和当的垂直度，使机床楼上安装成为可能。可以调节机床水平，调节范围大、方便、快捷。采用丁腈合成橡胶，耐油脂和冷却剂。

适用范围：

金属加工机床，缎压机床、纺织、印刷机械、食品加工机、橡胶机械、电线、电缆机械、发电机及重型设备。

使用方法：

将所需垫铁放入机床地脚孔下，穿入螺栓，旋至和承重盘接触实，然后进行机床水平调节（螺栓顺时针旋转，机床升起）：调好机床水平后，旋紧螺母，固定水平状态。因为橡胶的里蠕变现象，在垫 铁第一次使用时，两星期以后再调节一次机床水平。